week3. 3D pringting- Can cover

 

Concept

When I drink a can of coke or beer, the top edge always seems dirty for me. So I always try to wash them out before I drink. For this matter, I wanted to create a cover that I can attach to top of the can, so I don’t need to wash it or clean it every time.


Sketch
fullsizerender-1

fullsizerender-2


Process
screen-shot-2016-09-25-at-11-48-55-pm screen-shot-2016-09-27-at-10-46-45-am screen-shot-2016-09-27-at-10-47-00-am screen-shot-2016-09-27-at-10-46-18-am screen-shot-2016-09-27-at-10-47-37-am screen-shot-2016-09-27-at-10-46-00-am


Cura

screen-shot-2016-09-26-at-9-27-16-pm


3D printing

img_5454

img_5471Failed!!!!!

Did it again!!


img_5517

img_5534

The size fitted, but little bit tight! And the quality was not good… So did it again!!!

img_5525

img_5542img_5537

Now, It’s little bit big……


I resized it and printed again, so it could fit perfectly.

fullsizerender-6 fullsizerender-5

week3. 3D pringting- Can cover

Week1. 3D printing

Assignment : Model something that fits inside a 3″x 3″x 3″ cube using at least 5 commands.

I created a simple “Vase”.

 

Process

 

1. With Polyline, I drew a outline of the vase.
screen-shot-2016-09-20-at-11-59-24-am


2. To change the shape I made roughly, I used Edit points on/off function and Fillet curves to make the corner more smooth.screen-shot-2016-09-20-at-12-00-34-pm


3. Then, Revolve.
screen-shot-2016-09-20-at-12-02-30-pm


4. I made a handle with Sweep 1 rail using circle and curve line.

screen-shot-2016-09-20-at-12-04-47-pm screen-shot-2016-09-20-at-12-05-19-pm


5. And connected the vase body and the handle with Boolean 2 objects function.
screen-shot-2016-09-20-at-12-24-58-pm screen-shot-2016-09-20-at-12-25-17-pm screen-shot-2016-09-20-at-12-28-22-pm

Week1. 3D printing